EVO STORM-TOP roll off container cover with permanent mount. Opens to either side of container.

Ships as kit. Covers are 100″ wide and can be assembled in lengths from 18′ to 24′ long in 6″ increments.

Assembly time is approximately 1-2 hours.

Features

• EPA stormwater exposure compliant
• Permanently mounted and can open to either side of the container
• Lockable to protect container from theft and unauthorized dumping
• Helps avoid overcharges at the scales for excess snow and rain weight in the container
• LESS THAN 15LB OF FORCE REQUIRED TO OPEN AND CLOSE.
• Far below OSHA ergonomic push pull limits
• Balanced roller system allows effortless opening and closing
• Durable- UV protected polyethylene, impact resistant outer shell is made to withstand the most extreme weather conditions
• Permanently mounted and travels with container at all times.
• Container can be dumped with cover open or closed
• Locking hinges secure cover for transportation
• Covers ship as a kit in order to keep freight costs at a minimum to anywhere in North America
• Can be assembled in lengths from 18′ to 24′ long in 6″ increments
• Container width cannot exceed 96″
• Cover adds 14″ to height of the container
• Adjustable operator handle accommodates any container height
• Cover will not open full 90 degrees on container less than 53″ tall
• Proudly made in the USA
• Item# ST-8300-EVO
• US PATENTS 9434539, 10233017, 11753238

Storm-Top overhang kit for containers with raised gates

Item# ST-3000-RGK

EXTENSION KIT ONLY. FULL COVER NOT INCLUDED.

Extension kit for Storm-Top covers. The kit extends covers up to 26′ long in 3″ increments.

Item# ST-8200-EXT

Optional guide rails for consistent container placement when using the stand alone Storm-Top system (Item# ST-8250-SA).

Item# ST-3000-GR

Optional automated drive system for the stand alone Storm-Top cover (Includes guide rails- Item# ST-3000-GR).

This listing is for the drive system only. COVER AND STAND NOT INCLUDED. Must also purchase the stand alone Storm-Top cover (Item# ST-8250-SA).

Power needed: 850W, 120V, 7.1AMP

Please allow up to 4 weeks for delivery of the automated drive system.

PLEASE NOTE CONTAINER HEIGHT WHEN ORDERING, CONTAINERS OVER 84″ REQUIRE AN EXTENDED UPPER MOUNTING TUBE

Item# ST-8200-AUTO

Optional counterweight box to mount the ST-8250-SA. This listing is for the galvanized steel frame form that you would fill with concrete. Concrete is NOT included, 1.25 cubic yards of concrete needed to fill the form. Dimensions are 5″ x 54″ x 198″.

STORM-TOP cover with stand alone mount to anchor to existing concrete.

If no concrete is present a new pad will have to be poured. We offer a steel form that you can fill with concrete if an above ground slab is desired (Item# ST-3000-CW click here)

Ships as kit. Covers are 100″ wide and can be assembled in lengths anywhere from 144″ to 276″ long in 3″ increments. PLEASE NOTE ON ORDER IF CONTAINER IS LESS THAN 17.5′ LONG AS SPECIFIC PARTS WILL BE NEEDED FOR ASSEMBLY.

If length longer than 276″ is needed also order the Storm-Top extension kit (Item# ST-8000-EXT click here)

Works for containers 47″ to 99″ tall

Assembly time approximately 3-1/2 to 4-1/2 hours

Features

• Meets EPA regulations for storm water exposure
• Bolt together design requires no welding or fabrication- Everything needed for assembly/install is included (except for concrete anchors)
• Requires less than 15lb of force to open and close making it easy for anyone to use
• Lockable to protect container from theft and unauthorized dumping
• Helps avoid overcharges at the scales for excess snow and rain weight in the container
• Torsion spring hinge assist allows virtually effortless opening and closing
• Durable- UV protected polyethylene, impact resistant outer shell is made to withstand the most extreme weather conditions
• Mounts to its own stand which is to be anchored to existing concrete slab or footing (CONCRETE SLAB NOT INCLUDED. A STEEL FORM TO FILL WITH CUSTOMER PROVIDED CONCRETE IS AVAILABLE FOR AN ADDITIONAL COST.)
• Roller system lifts up with the cover allowing full access to entire container
• Covers ship as a kit in order to keep freight costs at a minimum to anywhere in North America
• Can be assembled in lengths from 12′ to 23′ long in 3″ increments (Optional extension kit available for containers up to 26′)
• Stand alone system works for containers 47″ to 99″ tall and 84″ to 100″ wide
• Adjustable operator handle accommodates any container height
• Custom colors available with order of 10 or more
• Proudly made in the USA
• Item# ST-8250-SA
• Shipping dimensions and weight: 1pc order-85″W x 105″L x 17″H 880LB, 2pc order- 85″W x 105″L x 22″H 1730LB
• US PATENTS 9434539, 10273083, 10858183, 10233017

STORM-TOP cover with removable mount and fork pockets

Ships as kit. Covers are 100″ wide and can be assembled in lengths anywhere from 144″ to 276″ long in 3″ increments. PLEASE NOTE ON ORDER IF CONTAINER IS LESS THAN 17.5′ LONG AS SPECIFIC PARTS WILL BE NEEDED FOR ASSEMBLY.

If length longer than 276″ is needed also order the Storm-Top extension kit (Item# ST-8000-EXT click here)

Assembly time is approximately 2-3 hours.

Features

• Meets EPA regulations for storm water exposure
• Requires less than 15lb of force to open and close making it easy for anyone to use
• Bolt together design requires no welding or fabrication- Everything needed for assembly/install is included
• Lockable to protect container from theft and unauthorized dumping
• Helps avoid overcharges at the scales for excess snow and rain weight in the container
• Torsion spring hinge assist allow virtually effortless opening and closing
• Durable- UV protected polyethylene, impact resistant outer shell is made to withstand the most extreme weather conditions
• Can be removed or mounted to any container in less than a minute
• Removable Storm-Top cover is not meant to be left on container during transport or dumping
• Roller system lifts up with the cover allowing full access to entire container
• Covers ship as a kit in order to keep freight costs at a minimum to anywhere in North America
• Can be assembled in lengths from 12′ to 23′ long in 3″ increments (Optional extension kit available for containers up to 26′)
• Fits containers 84″ to 100″ wide
• Adjustable operator handle accommodates any container height
• Cover will not open full 90 degrees on container less than 53″ tall
• Shipping dimensions and weight: 1pc order-85″W x 105″L x 17″H 880LB, 2pc order- 85″W x 105″L x 22″H 1410LB
• Proudly made in the USA
• Item# ST-8200-R
• US PATENTS 9434539, 10233017, and 10858183 

STORM-TOP standard roll off cover with permanent mount- Aluminum Frame

Ships as kit. Covers are 100″ wide and can be assembled in lengths anywhere from 144″ to 276″ long in 3″ increments. PLEASE NOTE ON ORDER IF CONTAINER IS LESS THAN 17.5′ LONG AS SPECIFIC PARTS WILL BE NEEDED FOR ASSEMBLY.

If length longer than 276″ is needed also order the Storm-Top extension kit (Item# ST-8000-EXT click here)

Assembly time is approximately 2-3 hours.

Features

• Meets EPA regulations for storm water exposure
• Bolt together design requires no welding or fabrication- Everything needed for assembly/install is included
• Requires less than 15lb of force to open and close making it easy to use for anyone.
• Lockable to protect container from theft and unauthorized dumping
• Helps avoid overcharges at the scales for excess snow and rain weight in the container
• Torsion spring hinge assist allows virtually effortless opening and closing
• Durable- UV protected polyethylene, impact resistant outer shell is made to withstand the most extreme weather conditions
• Roller system lifts up with the cover allowing full access to entire container
• Standard design is permanently mounted and travels with container at all times.
• Container can be dumped with cover open or closed
• Comes with heavy duty retractable ratchet straps to use while transporting container
• Covers ship as a kit in order to keep freight costs at a minimum to anywhere in North America
• Can be assembled in lengths from 12′ to 23′ long in 3″ increments
• Fits containers 84″ to 100″ wide
• Cover adds 14″ to the height of the container
• Adjustable operator handle accommodates any container height
• Cover will not open full 90 degrees on container less than 53″ tall
• Proudly made in the USA
• Item# ST-8200-S
• Shipping dimensions and weight: 1pc order- 85″W x 105″L x 17″H 710LB, 2pc order- 85″W x 105″L x 22″H 1210LB
• US PATENTS 9434539, 10233017, and 10858183 

Click Here For Assembly Video